CWS Construction in Boulder City, NV

CWS Construction in Boulder City, NV

Stonehall Construction provides independent CWS cabinet installation, refacing, and bathroom vanity service across Boulder City, NV. We’re not a manufacturer-authorized shop. We’re a licensed general contractor whose crews handle CWS kitchen and bath packages daily, and what separates our work in Boulder City comes down to one thing: we know these 1930s and 1940s bungalow walls don’t hang cabinets like modern drywall does. Call (833) 772-4634 for a free estimate on your CWS project.

Why Boulder City Residents Choose Us for CWS Service

CWS cabinetry shows up in a lot of Boulder City homes, and after enough installs we’ve learned exactly where these lines hold up and where they don’t. The Lexington and Bristol recessed-panel door styles are good workhorses when they’re hung right. The bath vanity collections with furniture-style legs look sharp in a remodel. But the install matters more than the box, and in Boulder City the install has to account for walls that predate drywall by decades.

Nolan Briggs grew up near the Carey Avenue corridor in North Las Vegas and learned construction through the building trades program at College of Southern Nevada. He’s spent the better part of two decades working from framing crews to project management across the valley, and he founded Stonehall Construction to do things the right way the first time. That’s the standard our crews bring to every CWS install in Boulder City. We scribe, shim, and seal for desert-dry air. We don’t rush a cabinet onto a wall that isn’t ready for it.

We’re also a full-scope general contractor. That means when your CWS project turns out to need blocking, furring, a plumbing rough-in adjustment, or a tile backsplash, we handle it all under one contract. You’re not coordinating a cabinet guy, a drywall guy, and a plumber. One call, one crew, one accountable team.

Common CWS Construction Problems We Solve in Boulder City

Five failure patterns show up again and again in Boulder City CWS cabinetry. Here’s what we see, why it happens here, and what we do about it.

• Warped or delaminated door and drawer fronts. In Boulder City’s summer heat, cabinets mounted against sun-baked exterior walls without a thermal break take a beating. The CWS door fronts expand and contract until the laminate or paint film starts to separate. We re-hang with proper standoffs, rebuild the affected fronts, and the problem stays fixed.
• Shrunk face frames and open miter joints. Boulder City’s indoor humidity sits low most of the year. Solid-wood CWS face frames dry out, miter joints on painted doors open up, and then monsoon season swells everything shut again. We address the movement at the source: relieving joints, resealing edges, and replacing doors where the damage is past the point of a clean repair.
• Blistered thermofoil on bath vanities. A CWS vanity near a shower without proper exhaust gets steam-soaked daily. The thermofoil peels, the particleboard box starts to swell, and the vanity is done. We quote the fix honestly: if the box is sound we reface. If the particleboard is swelling, we tell you plain that a replace is the only repair that holds.
• Worn soft-close hinges and drawer glides. Desert dust works its way into the tracks and grinds the soft-close hardware down. We swap in OEM CWS hinges and glides where the box is solid, and match quality aftermarket soft-close hardware where the OEM part is discontinued or priced unreasonably. Either way, the doors stop drifting and the drawers stop slamming.
• Cabinets pulling away from plaster-and-block walls. This is the Boulder City-specific one. A lot of our CWS work happens in homes where the kitchen walls are plaster over block or thin furring, not drywall. An installer who runs cabinet screws straight into that wall gets a cabinet that sags, pulls loose, or drops. We cut in plywood blocking tied to the actual structure before the CWS box ever goes up.

CWS Service in Boulder City: What Local Conditions Mean for Your Project

Much of Boulder City’s housing stock is the 1930s and 1940s Boulder City Homes-era bungalow construction. These are the houses that line the streets off Nevada Way and around the original townsite. Their kitchen and bath walls are often plaster or furred-out block rather than modern drywall, which means CWS cabinet boxes need custom furring and blocking before they can be hung plumb. A standard install that works in a Henderson tract home built in 2005 fails in a downtown Boulder City bungalow built in 1938. We cut in 3/4-inch plywood blocking tied to the studs, shim the boxes level, and only then does the CWS cabinet go up. That’s the difference between a door that opens clean in five years and one that binds against the frame. We’ve seen it before. Here’s how we fix it.

On a Boulder City Homes-era bungalow just off Nevada Way, we pulled a set of sagging CWS oak wall cabinets whose original installer had screwed straight into thin furring over block and the anchors had given way. The homeowner had lived with doors that swung open on their own for two years. We cut in new 3/4-inch plywood blocking tied to the studs, rehung the CWS boxes plumb and shimmed, and swapped the worn glides for soft-close hardware so the doors no longer drift open. Took us a day and a half, and the cabinets are solid now. That job is why we tell every Boulder City homeowner the same thing: check what’s behind the wall before you hang anything on it.

CWS Models & Products We Service in Boulder City

Our crews work with the full range of CWS cabinetry lines common in Boulder City kitchens and baths. That includes the Lexington and Bristol recessed-panel door styles, the all-plywood Maple and Oak box lines, the bath vanity collections with furniture-style legs, and the semi-custom overlay cabinet series with soft-close hardware. We know these lines inside and out, from the hinge spacing to the finish tolerances.

On parts, our stance is simple. We source OEM CWS hinges, glides, and door fronts when the box is sound and the OEM part is available at a fair price. Where the OEM part is discontinued or priced out of line, we match quality aftermarket soft-close hardware that holds up. We stock common CWS parts and hardware locally in the valley, so fast turnaround in Boulder City isn’t a promise, it’s logistics.

We also carry the full Stonehall brand portfolio, which means your CWS install can include Cambria or Caesarstone countertops, a Kohler or Moen faucet, and the tile backsplash, all through a single contract. Cabinet work rarely stops at the cabinet.

CWS Service Pricing in Boulder City

FAQs – CWS Construction in Boulder City

Service Areas Near Boulder City

We run CWS construction crews across the southern Nevada valley. Along with Boulder City, we handle CWS cabinet and vanity work in North Las Vegas, Henderson, Las Vegas, Winchester, and out toward Sandy Valley. If you’re in the 89005 or 89006 ZIP or anywhere nearby, we cover you.

Book Your CWS Service in Boulder City Today

Call (833) 772-4634 to schedule your free CWS construction estimate in Boulder City. We’ll walk the space with you, check the wall conditions, and give you a written quote before any work begins.

Written by Nolan Briggs, Owner at Stonehall Construction, serving Boulder City and the southern Nevada valley.

Looking for the broader picture? See our CWS service page or the Boulder City service area page.