Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Whitney, NV
CGI cabinet service in Whitney usually means one of three things: installation, refacing, or repair of thermofoil and wood cabinet lines that have been through a few desert summers. We’re Stonehall Construction, an independent general contractor serving Whitney and the surrounding valley, and we handle all three. The difference with us: we understand why CGI cabinets fail the way they do here, and we fix the root cause, not just the symptom. If you’re dealing with peeling doors, sagging drawers, or a full kitchen that needs new cabinets, call (833) 772-4634 for a free estimate.
Why Whitney Residents Choose Us for CGI Service
CGI cabinets show up in a lot of Whitney kitchens. They’re common in the 89122 ZIP, in homes off Tropicana and along Boulder Highway, and in the quiet residential pockets east of Nellis. We’ve installed, refaced, and repaired enough of them to speak plainly about how the boxes, glides, and door finishes actually hold up here.
Nolan Briggs, our owner and general contractor, grew up near the Carey Avenue corridor in North Las Vegas and learned the trade through the building trades program at College of Southern Nevada. He spent nearly two decades moving from framing crews to project management before founding Stonehall Construction. That background shapes how we approach CGI work: honest measurement first, correct installation second, and a clear conversation about what’s fixable before anyone talks replacement.
We’re not manufacturer-affiliated or an authorized CGI dealer. That independence matters. We don’t push a full tear-out when refacing makes more sense. We spec OEM CGI hinges, glides, and matching door fronts when the line is still available so the finish and fit match the rest of the run. When a series is discontinued, we use quality aftermarket soft-close hardware and tell you up front it won’t color-match perfectly. We’ve seen it before. Here’s how we fix it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CGI Construction Problems We Solve in Whitney
- Thermofoil delamination and edge peeling. Whitney’s indoor humidity often drops into the teens, and the sun through east- and west-facing windows bakes cabinet doors relentlessly. The foil layer on CGI thermofoil fronts lifts at the edges, cracks, and pulls away. We strip, replace, or reface those doors depending on how far the damage has spread.
- Sagging or snapped drawer glides. When a base cabinet was installed with shims that let the box rack out of square, the drawer glides bear uneven weight. Over time, soft-close mechanisms snap or the drawer drops. We re-square the box, re-shim it level, and replace the glides with OEM or upgraded aftermarket hardware.
- Swollen particleboard and MDF cores. Slow leaks under the sink or along a dishwasher line seep into the toe-kick and cabinet base. Particleboard swells and crumbles. We cut out the rotted section, replace the box if it’s structural, and reface or re-box when the layout is still sound.
- Uneven color drift and yellowing. Whitney sun hits one run of cabinets harder than the rest. After a few summers, the door and drawer fronts facing a window or patio door turn a different shade than the rest of the run. We match replacement fronts carefully, and when the original series is gone, we tell you honestly what to expect.
- Racked boxes from poor initial installation. Some of the CGI kitchens we see in Whitney were installed fast and cheap. Doors sit crooked. Drawers bind. We re-level the boxes, re-install face frames square, and reset hinges so the whole run moves like it should.
CGI Service in Whitney: What Local Conditions Mean for Your Project
Whitney sits in the far southeast corner of the Las Vegas Valley. Summer highs routinely push past 105°F, and indoor relative humidity often drops into the single digits or teens. That’s a brutal combination for cabinet materials. Thermofoil wraps contract and lose their adhesive bond. Wood veneers dry out and cup. Particleboard and MDF give up whatever moisture they had and become brittle at the edges. A CGI thermofoil kitchen in Whitney will show edge lifting and glue failure years faster than the same cabinet line in a wetter climate, and that’s not a defect in the product as much as it’s the reality of desert air. We plan installations in Whitney accordingly: we leave proper expansion gaps, we check the box alignment before the doors go on, and we recommend finishes and materials that hold up under direct afternoon sun.
We were called to a Whitney home in the 89122 ZIP where the CGI thermofoil doors on the sink run had peeled back along the bottom edges and two drawer glides had snapped, sagging under a heavy pot drawer. Instead of a full tear-out, our crew replaced the failed doors with matching fronts, re-squared and re-shimmed the base boxes, and swapped in OEM-style soft-close glides, then reset a new quartz top over the same footprint. The homeowner kept the layout and got a tight, quiet kitchen back without paying for a complete remodel.
CGI Models & Products We Service in Whitney
We work across the full CGI line that’s common in Whitney homes. That includes the All-Wood Shaker and raised-panel kitchen cabinet series, the thermofoil (foil-wrapped) door and drawer fronts, the ready-to-assemble (RTA) plywood-box cabinet sets, and the bath vanity and linen cabinet series. When a specific door or drawer front is still orderable, we spec it directly so the match is right. When the line’s gone, we go aftermarket and explain the difference before the work starts.
Beyond the cabinets themselves, we handle the full CGI scope as an independent contractor, which means the countertop, the backsplash, the plumbing rough-in, and the electrical moves all fall under our single contract.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Whitney
Here’s what you can expect to budget for CGI work in Whitney. These ranges reflect typical projects across the 89122 ZIP and the broader valley.
| Service | Typical Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
What moves the number: whether we’re refacing or replacing, the cabinet line still being produced or not, the countertop material, and how much the existing boxes need to be re-squared or rebuilt. Every free estimate includes a written line-item scope, so you see the exact costs before work starts. Call (833) 772-4634 to schedule yours.
Serving Whitney, NV - Our Local Coverage Area
We serve Whitney and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Whitney
Yes, in most cases. If the cabinet boxes are still square and the door frames are intact, we can reface the doors and drawer fronts with new thermofoil, veneer, or paint-grade material. Refacing usually costs less than a full replacement and keeps your existing layout. When the damage is too far gone, we tell you straight. Call (833) 772-4634 and we’ll assess what’s salvageable.
The most common cause is Whitney’s extreme dry heat combined with direct sunlight. Thermofoil wraps contract and adhesive bonds fail faster in low humidity. If the doors face an east- or west-facing window, that exposure accelerates the problem. The fix usually means replacing or refacing the affected doors and checking the cabinet alignment so the new fronts sit properly.
We do. Stonehall Construction carries the cabinet install, the countertop templating and install, the backsplash, and the plumbing and electrical rough-in under one contract. That means you’re not coordinating a cabinet crew and a separate countertop fabricator. We manage the sequence from demo to final walkthrough, and we pull the permits when the scope calls for them.
A refacing project typically runs five to ten working days depending on the number of boxes and whether we’re doing the countertop at the same time. A full replacement with new boxes and counters usually lands in the two-to-four-week range. Whitney jobs can move quickly when materials are in stock; custom order doors add lead time. We’ll give you a schedule with the estimate. Call (833) 772-4634 for a timeline on your specific kitchen.
In most Whitney homes, it’s both. The cabinet box has usually racked out of square from bad shimming, and the glides have been carrying uneven load until they sag or snap. We re-square the box, re-shim it level, and install new OEM or upgraded soft-close glides. When the drawer box itself is still solid, that’s a repair, not a replacement. Call (833) 772-4634 and we’ll diagnose it on site.
Service Areas Near Whitney
Stonehall Construction serves Whitney service area and the communities around it: North Las Vegas, Sunrise Manor, Winchester, and Paradise. If you’re just outside Whitney, we also regularly work in Spring Valley and Summerlin South. Call us and we’ll confirm coverage for your address.
Book Your CGI Service in Whitney Today
If your CGI cabinets need attention in Whitney - or you need CGI service in Sunrise Manor - we’re ready to take a look. Estimates are free. The conversation is honest. Call (833) 772-4634 to schedule yours, or reach out to talk through what you’re seeing.
Written by Nolan Briggs, Owner & General Contractor at Stonehall Construction, serving Whitney since he picked up a framing hammer.