CGI Construction Service in North Las Vegas, NV

Why North Las Vegas Homeowners Choose CGI Construction

Stonehall Construction provides CGI in North Las Vegas: independent cabinet installation, refacing, and repair with hands-on experience in the brand’s RTA, semi-custom, and refacing systems. We’re not a CGI dealer or authorized service center. We’re a licensed general contractor who has installed and repaired enough CGI cabinetry in North Las Vegas homes to know exactly where the product line excels and where it needs attention. If you’re dealing with swollen doors, loose hinges, or a full kitchen remodel that includes CGI cabinets, call (833) 772-4634 for a free estimate.

Call (833) 772-4634

What separates our CGI work from every other contractor in North Las Vegas is simple: we’ve built enough of these cabinets to know their construction inside and out, and we’re independent, which means we’ll tell you the truth about repair versus replacement, OEM versus aftermarket parts, and whether CGI is even the right fit for your project. Nolan Briggs, our owner and general contractor, grew up near the Carey Avenue corridor in North Las Vegas and has spent years working on homes across this valley, including plenty of kitchens with CGI cabinetry that needed more than a coat of paint.

Why Trust Stonehall Construction for Your CGI Construction?

CGI cabinets appear in a lot of North Las Vegas kitchens, especially in tract homes built during the 2000s boom. We’ve installed hundreds of CGI cabinet runs across kitchens and bathrooms in this city, and that volume matters. General contractors who occasionally hang a CGI box don’t catch the small things: the slight difference in how the brand’s RTA frames seat against a slab floor, the specific hinge pocket depth on the semi-custom line, the way the finish wears on drawer fronts near a range. We do.

Nolan learned construction fundamentals in the building trades program at College of Southern Nevada and spent nearly two decades on framing crews and project management before founding Stonehall Construction. His son just started shadowing him on weekends, which Nolan says is either the best decision he’s ever made or the worst, he hasn’t decided yet. That’s the kind of ownership that shows up on site. When we work on CGI cabinetry in North Las Vegas, we’re not reading the installation manual for the first time. We’ve seen it before. Here’s how we fix it.

We also carry the licensing to pull permits and manage the full scope. That means if your CGI cabinet project turns into a kitchen remodel with plumbing, electrical, counters, and backsplash, you’re not coordinating four different companies. Stonehall manages it all under one contract, one timeline, and one point of contact.

Common CGI Construction Problems We Fix in North Las Vegas

North Las Vegas has a specific climate problem: dry heat, low humidity, and big temperature swings. CGI cabinets respond to that environment in predictable ways. Here are the five failure patterns we see most often.

• Door and drawer front swelling in summer. CGI maple and oak doors absorb ambient moisture briefly during the monsoon season, then dry back out. In North Las Vegas, that cycle is less pronounced than in coastal climates, but cabinets near dishwashers, sinks, or unconditioned garage-adjacent walls still move. The result: doors that stick, rub, or won’t close flush by August. The fix is usually selective door replacement or refacing, not new boxes.
• Hinge screws stripping out of the stiles. CGI’s entry and mid-tier lines use particleboard or MDF stiles in some models. The hinge screws hold fine for years, but in busy North Las Vegas kitchens where doors get opened hundreds of times a week, the screws eventually wallow out. We replace the stock hinges with aftermarket units that use a wider screw pattern and often feature soft-close mechanisms that reduce impact stress on the cabinet face.
• Frame joint separation at the corners. Dry desert air pulls moisture from wood and composite materials. If a CGI RTA cabinet was assembled before the materials acclimated to North Las Vegas conditions, the face frame joints can open up at the corners. We see this most often in homes where a previous installer built cabinets in a garage right off the delivery truck. The fix is disassembly, proper glue application, and square reassembly, or in worse cases, selective replacement of the affected cabinet.
• RTA box racking and drawer glide failure. CGI Ready-to-Assemble lines depend on correct assembly: glue blocks installed, frames checked for square, backs seated flush. When a handyman or well-meaning homeowner skips those steps, the boxes rack out of square and the drawer glides bind or fail. We rebuild or replace the affected boxes and reinstall the glides with proper alignment. Most times, the existing doors and drawer fronts can be reused.
• Finish delamination near heat sources. CGI cabinet doors installed adjacent to an oven, toaster, or dishwasher can delaminate where the laminate or thermofoil faces peel at the edges. We replace the affected doors and drawer fronts with new CGI components matched to the existing finish, or recommend a reface if the damage is widespread.

CGI Parts & Our Repair-vs-Replace Approach

When a homeowner wants a true color and grain match, we source OEM CGI doors, drawer fronts, and hardware. The brand’s finish codes matter, especially on maple and cherry lines where a few months of UV exposure in a North Las Vegas kitchen changes the tone slightly. OEM is the right call for those precise matches. But we’re also honest: some stock CGI hinges and glides are fine, not great. When a soft-close aftermarket hinge from a supplier we trust outperforms the stock component and lasts longer in Southern Nevada’s dry climate, we’ll recommend it and explain why.

The bigger question is always repair versus replace. If the box is structurally sound, level, and square, refacing with new CGI doors and drawer fronts brings the kitchen back for a fraction of full tear-out cost. If the boxes are racked, moisture-damaged, or failing at the joints, we’ll tell you that too. Refacing a failing cabinet is throwing money away. We’d rather tell you the truth. Call (833) 772-4634 if you want an honest assessment of your existing CGI cabinets.

Our CGI Service Process – Step by Step

1. 1
   Diagnosis. We inspect the cabinet boxes, face frames, hinges, glides, and door alignment. We check for square, measure reveal gaps, and identify whether the issue is material failure, installation error, or environmental movement. Every diagnosis is specific; we point to the problem and explain the cause.
2. 2
   Repair or install plan. If we’re repairing, we quote parts and labor with the repair-versus-replace recommendation in writing. If we’re installing new CGI cabinets, we verify the models, finish codes, and delivery schedule, then acclimate the materials to the North Las Vegas environment before assembly.
3. 3
   Execution. We assemble or install with glue blocks where the CGI RTA line requires them, square-check every box, and adjust doors and drawers to consistent reveals. If this is part of a larger remodel, we coordinate countertops, plumbing, and electrical so the cabinets go in on schedule.
4. 4
   Testing and adjustment. Every door opens and closes cleanly. Every drawer glides without binding. We cycle the hinges, check soft-close function, and confirm that nothing rubs. We walk the kitchen with you before we call the job done.
5. 5
   Warranty and follow-up. We stand behind our workmanship. If something shifts after install, we come back. That’s the point of hiring a North Las Vegas general contractor who owns the outcome.

CGI Products We Service & Install in North Las Vegas

We work across the CGI product range. That includes the Ready-to-Assemble cabinet lines common in budget-conscious North Las Vegas kitchen refreshes, the Semi-Custom Wood Cabinetry spec’d in higher-end remodels, and both Euro-style and Shaker door profiles. We also handle CGI Cabinet Refacing Systems for kitchens where the boxes are sound but the doors and drawer fronts have given up. Our local inventory includes matching hardware for the common CGI hinge patterns, plus the shims and alignment tools needed for slab-floor installations. If you’re planning a kitchen update in North Las Vegas and want Las Vegas CGI service that gets your cabinets installed correctly the first time, call (833) 772-4634.

We Also Service These Brands

Your kitchen probably isn’t one brand. Stonehall Construction also installs and services KraftMaid cabinets, Cambria and Silestone countertops, and Kohler fixtures. That matters when you want a single contractor who can handle the entire kitchen, not just the cabinet line. One contractor. Every trade.

FAQs – CGI Construction Service in North Las Vegas

Book Your CGI Service in North Las Vegas, NV

If your CGI cabinets are sticking, pulling loose, or ready for replacement, Stonehall Construction can help. We serve all of North Las Vegas, from the older neighborhoods near Carey Avenue to newer developments across the city, and can connect you with our Sunrise Manor CGI service if you’re in that area. Call (833) 772-4634 to schedule a free estimate.

Written by Nolan Briggs, Owner at Stonehall Construction, serving North Las Vegas and the greater Las Vegas Valley.