Dvele Construction Service in North Las Vegas, NV

Why North Las Vegas Homeowners Choose Dvele Construction

We provide North Las Vegas Dvele service for construction across the area, from module retrofits and wet-wall changes to finish-matched kitchen and bath work. Our crews know how Dvele’s closed-panel walls and pre-set utility chases behave in the field, which means we open, modify, and re-seal them without creating problems you’ll inherit later. Call (833) 772-4634 for a free estimate on your Dvele project.

Call (833) 772-4634

Dvele builds homes differently than anything stick-framed on a North Las Vegas lot. The modules arrive with factory-finished interiors, closed panel systems, and plumbing chases already routed. That precision is great until you want to move a sink, add an island, or convert a tub to a shower. Then the factory tolerances become the thing you have to work around, and most contractors in the valley haven’t touched enough Dvele homes to know where those hidden chases run. We have.

Stonehall Construction is an independent Dvele service provider. We are not affiliated with or authorized by Dvele, and we don’t pretend to be. What we are is a licensed general contractor in North Las Vegas that has done the unglamorous work of cutting into Dvele modules, mapping their utility paths, patching their factory finishes, and re-flashing their exterior panel interfaces. That experience is what keeps a simple remodel from turning into a water intrusion problem two monsoon seasons later.

Beyond Dvele, we also service and install KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler plumbing fixtures on a regular basis. So if your Dvele kitchen or bath project touches other brands, one call covers the coordination.

Key Takeaways

• Stonehall Construction is an independent Dvele service provider in North Las Vegas, not a factory-authorized dealer.
• We handle Dvele module retrofits, wet-wall plumbing changes, panel seam repairs, and finish matching.
• We document every panel and chase we touch so your home’s as-built record stays clean.
• Our work covers the specific ways Dvele’s closed-panel construction changes a remodel’s scope.
• Call (833) 772-4634 for a free estimate and a straight answer about what your Dvele home actually needs.

Why Trust Stonehall Construction for Your Dvele Construction?

Nolan Briggs founded Stonehall Construction after working his way from framing crews to project management on Dvele in Las Vegas and across the valley. He learned the fundamentals through the building trades program at College of Southern Nevada, then spent two decades reading structural drawings and fixing other people’s shortcuts before deciding to run jobs his own way. His rule on Dvele work is simple: map the chase before you cut the panel. We’ve seen it before. Here’s how we fix it.

That rule matters because Dvele modules don’t give you second chances. The factory-applied interior finish is a closed system. Cut a panel in the wrong spot and you’re not just patching drywall, you’re blending a factory coating that was never designed for field modification. Our crews have learned the Dvele production tolerances and the way their panel seams telegraph when temperature swings hit North Las Vegas between winter nights and July afternoons. We know which seams will show and which won’t before the saw comes out.

We also keep a documented record of every Dvele panel penetration, chase modification, and exterior re-flash we perform. When you sell the home or when the next contractor needs to know what was changed, you’ll have a clean as-built trail instead of a mystery behind the wall. That’s the kind of accountability a modular home demands.

Common Dvele Construction Problems We Fix in North Las Vegas

Dvele’s plank and panel exterior series, including the Eldorado model line and similar two-story modular designs, share a common weakness: what the factory finishes beautifully, the desert climate eventually tests. Here’s what we see most often on Dvele homes across North Las Vegas.

• Panel seam telegraphing after interior work. When a kitchen or bath wall gets opened for a remodel, the factory-applied finish coat on adjacent panels doesn’t tolerate field cutting without a blended patch. If the patch is done with standard drywall compound, the seam will telegraph through within a year. Dvele’s finish system requires a specific patch approach and finish-matched material, which we source and apply so the seam disappears.
• Shared utility chases that complicate new plumbing. Dvele modules stack plumbing chases vertically between floors. Adding a kitchen island sink, relocating a vanity drain, or moving a shower waste line means working inside that shared chase without damaging the module above or below. We’ve mapped enough Dvele chases in North Las Vegas to know where the stack runs and how to reroute within the existing cavity.
• Floor-to-wall transition gaps and squeaks. The pre-installed module flooring meets the site-set subfloor at the module seams. After a tub-to-shower conversion or any work that changes the floor load, those transition points can develop squeaks or tile lippage. We address the transition as part of the job instead of leaving you with a floor that announces every step.
• Exterior panel and window flashing issues after roof or gutter changes. The plank and panel facade on Dvele homes interfaces with window flashing in a specific way. When a roofer changes the gutter profile or replaces flashing without understanding that interface, Mojave wind-driven rain can wick behind the panel system. After any roof or gutter work on a Dvele in North Las Vegas, we re-detail those interfaces so water stays outside where it belongs.
• Wet-wall access for shower and tub work. Dvele’s bathroom wet walls are factory-assembled with the plumbing chase sealed behind the finish panel. Converting a tub to a shower means cutting into that wall precisely, moving the drain within the chase, and waterproofing the new opening without compromising the module’s structural integrity. It’s not a job for a handyman with a Sawzall.

Dvele Parts & Our Repair-vs-Replace Approach

We source Dvele-specific panel trim, chase fittings, and finish-matched patch materials through the factory parts channel where those components exist. Where Dvele doesn’t offer a direct replacement part, we use tested equivalents that match the performance and finish specifications. We will not fudge a panel seam to save a dollar, and we won’t install an off-brand fitting that creates a leak risk inside a shared chase.

When a Dvele component is structurally sound but cosmetically dated, we’ll recommend refacing or resealing over replacement. A full panel rebuild is expensive, and if the panel is doing its job, patching and refinishing is the honest call. But when a chase has been compromised, or a panel seam has delaminated, or the water has already found its way behind the exterior cladding, we’ll tell you plainly that a full rebuild is the smarter spend. Hiding a bad situation behind a patch is how small problems become wall rot.

Call (833) 772-4634 and we’ll assess your Dvele issue and tell you what’s actually needed, not what’s easiest for us.

Our Dvele Service Process – Step by Step

1. 1
   Diagnosis and chase mapping. Before any panel is opened, we locate the utility chases and map the module’s plumbing and electrical paths. On Dvele homes, guessing is how you get a hole in the wrong place and a finish patch that never matches.
2. 2
   Controlled opening and modification. We cut the panel precisely, preserve any salvageable factory trim, and modify the chase or wet wall according to the original as-built configuration. Dust control and finish protection are part of this step, not an afterthought.
3. 3
   Repair, install, and finish matching. The plumbing, electrical, or structural work gets done, then we patch the panel using Dvele-compatible materials and blend the factory finish so the seam disappears under normal lighting. For tub-to-shower conversions, this includes full waterproofing and drain relocation within the chase.
4. 4
   Test and verify before resealing. We pressure-test plumbing, check panel fitment, and verify weather-tight flashing before the final finish goes on. A leak test on a Dvele wet wall is cheap insurance compared to re-opening a finished module.
5. 5
   Warranty and documentation. We stand behind our workmanship with a written workmanship warranty, and we provide you with a record of every panel and chase we touched. That as-built documentation is part of the job on a Dvele home, not an optional extra.

Dvele Products We Service & Install in North Las Vegas

Our Dvele service work covers the full range of the brand’s modular construction. We work on two-story single-family models like the Eldorado series with plank and panel exteriors, single-level accessible-plan modules with pre-finished interiors, and Dvele ADU and accessory dwelling modules. Whether the project is a kitchen remodel, a tub-to-shower conversion, or a roof repair that requires re-flashing the panel interface, we handle the scope from the foundation to the roofline.

We keep common Dvele-compatible patch materials, chase fittings, and finish-matching supplies accessible for North Las Vegas jobs, so turnaround on routine repairs and conversions doesn’t stall waiting on long lead times.

We Also Service These Brands

Stonehall Construction isn’t a single-brand shop. Alongside Dvele work, we install and service KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler plumbing fixtures. If your Dvele project touches these or any of the 50+ other manufacturer brands we carry, the coordination stays under one contract and one point of contact.

What Does Dvele Construction Cost in North Las Vegas?

Dvele-specific work in North Las Vegas carries a cost range that depends on how much of the module’s factory system gets opened and modified. A tub-to-shower conversion on a Dvele wet wall runs $3,500 to $10,000 because of the chase work and finish matching. A full kitchen remodel in a Dvele module ranges from $14,000 to $45,000 depending on the panel modifications and finish requirements. A roof repair with panel re-flashing starts around $400 and can run to $1,800 for more involved detailing work.

Here are the current North Las Vegas price ranges for the Dvele work we handle most often.

Every estimate is a written, line-item quote. No change orders on work we’ve already priced unless you change the scope. That’s the way Nolan has run Stonehall Construction since day one, and it’s the only way we know how to price modular work where the hidden conditions behind Dvele panels are part of the job.

FAQs – Dvele Construction Service in North Las Vegas

Book Your Dvele Service in North Las Vegas, NV

If you own a Dvele home in North Las Vegas and you’re planning a remodel, a conversion, or a repair, call (833) 772-4634 for a free estimate. We’ll walk the site, map the chases, and tell you what your project actually takes, with written pricing before anything gets cut.

Written by Nolan Briggs, Owner & General Contractor at Stonehall Construction, serving North Las Vegas and the surrounding valley.