Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why North Las Vegas Homeowners Choose Therma-Tru Construction
Stonehall Construction provides independent Therma-Tru door installation, repair, and service across the area, from Aliante to Eldorado and everywhere between the 215 and Craig Road. We work on Fiber-Classic, Smooth-Star, and Profiles Series entry systems, fixing the specific failure points that desert heat, dust, and monsoon storms create in Therma-Tru doors. As an independent contractor, not a Therma-Tru authorized dealer, our recommendations follow what your door actually needs rather than a manufacturer script. If you’re dealing with a sagging slab, a failed sill seal, or weatherstripping that’s baked flat, call Nolan Briggs and the Stonehall team at (833) 772-4634 for a straight answer.
Why Trust Stonehall Construction for Your Therma-Tru Construction?
Nolan Briggs grew up near the Carey Avenue corridor in North Las Vegas and built his reputation on plain talk and tight schedules. He learned construction through the building trades program at College of Southern Nevada, then spent nearly two decades working framing crews and running project management on residential and commercial jobs across the valley before founding Stonehall Construction. That background matters when you’re dealing with a Therma-Tru door that’s been fighting North Las Vegas sun for eight summers.
Our team has installed and serviced Therma-Tru door systems long enough to know their specific failure points. We’ve reset Fiber-Classic slabs that sagged at the hinge side. We’ve replaced Tru-Defense sills that let fine desert dust creep under the door every afternoon. We’ve rehung Smooth-Star doors that rubbed the strike plate so badly the deadbolt wouldn’t throw. None of this is mysterious to us. We’ve seen it before. Here’s how we fix it.
We use Therma-Tru OEM sills, weatherstrip, and hardware wherever the door frame is still sound. We don’t cut corners with cheap aftermarket seals on doors that still have years of life left. And when a door has genuinely failed beyond adjustment, we tell you that too, because patching a delaminated fiberglass skin is throwing good money after bad. Nolan’s oldest son just started shadowing him on weekends, which Nolan says is either the best decision he’s ever made or the worst. He hasn’t decided yet. What he has decided is that Stonehall doesn’t walk away from a problem.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Therma-Tru Construction Problems We Fix in North Las Vegas
- Fiberglass slab warping and delamination on west-facing entries. Fiber-Classic and Smooth-Star doors take brutal afternoon sun in North Las Vegas neighborhoods like Losee and Centennial. When the factory finish breaks down at the bottom rail, the fiberglass skin starts to lift. We see delamination at the bottom rail more often than anywhere else on the door, and it’s almost always on the west or southwest exposure.
- Tru-Defense and adjustable sill assemblies losing their seal. The adjustable sill cap on a Therma-Tru door can crush or drift out of alignment over time, especially if the door gets heavy use. Once that seal fails, fine desert dust finds its way in along the bottom edge, and during monsoon season, wind-driven rain follows the same path. We reset and replace these sills regularly across North Las Vegas.
- Weatherstripping and corner seals drying out in low-humidity heat. The rubber and vinyl seals on Therma-Tru frames shrink and harden after enough summers in the Las Vegas valley. You’ll notice daylight gaps at the frame corners and air infiltration you can feel standing near the door. This is a wear item, not a defect, but it needs addressing before your cooling bill pays for it all summer.
- Hinge-side sag and strike misalignment on heavier slabs. Fiber-Classic and Smooth-Star doors are solid and heavy. After years of intense heat cycles, hinges wear and the slab drops just enough to drag at the strike plate. The deadbolt stops aligning. The door sticks. Sometimes the fix is hinge adjustment; other times the frame has shifted and needs resetting.
- Multi-point lock mechanisms binding after dust infiltration. Therma-Tru door systems with multi-point locking hardware don’t like fine grit. North Las Vegas dust gets into the mechanism channels and the lock gets stiff, then sticks, then stops engaging the top and bottom bolts properly. We service the hardware, clean the channels, and realign the strike plates so the lock throws cleanly.
Therma-Tru Parts & Our Repair-vs-Replace Approach
Having these parts on hand means most service calls in North Las Vegas don’t wait on shipping from the manufacturer. For older Therma-Tru models with hard-to-source profiles, we turn to quality aftermarket seals only when the OEM equivalent is no longer available, and we tell you that before we install anything.
Repair versus replace comes down to the frame and the slab. If the frame is square and the slab hasn’t delaminated or warped beyond hinge adjustment, we repair. A new Tru-Defense sill, fresh weatherstripping, and corrected hinge alignment will get years of additional life out of a good door. But if the fiberglass skin has lifted and separated, or the slab has taken a warp that hinge adjustment can’t correct, replacement costs less over time than repeated patching. We’re not going to sell you a band-aid when the door is done. Call (833) 772-4634 and we’ll tell you honestly which situation you’re in.
Our Therma-Tru Service Process – Step by Step
- 1
Diagnosis. We inspect the slab, hinges, frame, sill, and weatherstripping as a system, not as isolated parts. A dragging door is rarely just one problem. On a recent North Las Vegas call, dust blowing in along the bottom of a west-facing Fiber-Classic entry turned out to be a crushed adjustable sill plus weatherstrip baked flat plus hinges that had drifted. We found all three in the first visit.
- 2
Repair or replacement. We quote the fix with line-item pricing before any work starts. If it’s a repair, we use OEM Therma-Tru parts wherever the frame is sound. If it’s a replacement, we spec the correct Therma-Tru model and size for the opening and exposure.
- 3
Installation. We reset frames, shim properly, rehang slabs with corrected hinge geometry, and install new sills and seals so the door closes square and seals tight. We test the multi-point lock, if equipped, and adjust the strike plates until every bolt throws clean.
- 4
Testing and walkthrough. We run the door through full open-close cycles, check for daylight gaps with the door closed, and verify the sill seal makes full contact along the bottom edge. We walk you through what we did and what to watch for seasonally.
See the difference
Before
After
Before
After
Before
AfterTherma-Tru Products We Service & Install in North Las Vegas
We service and install the full range of Therma-Tru entry door systems: Fiber-Classic Collection fiberglass doors, Smooth-Star Collection smooth fiberglass doors, and Profiles Series steel entry doors. That includes systems built with Tru-Defense sill options and multi-point locking hardware. We stock common OEM replacement sills, weatherstrip, corner seals, and threshold components locally for fast turnaround on service calls throughout North Las Vegas, from North Las Vegas Boulevard to the industrial corridor near Nellis Air Force Base.
We Also Service These Brands
Stonehall Construction is a full-scope general contractor, so Therma-Tru doors often sit alongside KraftMaid cabinets, Cambria or Silestone countertops, and Kohler fixtures in the same project. We’re not a single-brand shop. One contractor, every trade, and the material selections stay consistent from the curb to the kitchen.
FAQs – Therma-Tru Construction Service in North Las Vegas
Heat cycles in North Las Vegas cause the hinges to wear and the slab to settle just enough to drop the latch below the strike plate. The slab itself can also expand slightly in sustained high heat. We correct the hinge geometry and realign the strike, and we check the slab for warp before deciding whether adjustment is enough. Call (833) 772-4634 for an exact diagnosis. Estimates are free.
Yes. Fine desert dust finds any gap, and once the adjustable sill cap on a Tru-Defense sill crushes or drifts out of alignment, dust enters along the bottom edge. Wind-driven dust during spring gusts makes it worse. We reset or replace the sill and verify full contact along the entire bottom sweep.
If the slab has warped beyond what hinge adjustment can correct, new weatherstripping won’t fix the gap. You’ll still see daylight at the frame and feel air moving. We measure the warp first, then tell you honestly whether rehanging with corrected hinges will solve it or whether the slab needs replacement. Call (833) 772-4634 and we’ll put a number on both options.
The factory finish on a Fiber-Classic or Smooth-Star door breaks down faster on west-facing exposures in North Las Vegas than anywhere else on the house. Refinishing before the finish fails completely, usually every two to three years on a hard western exposure, prevents the fiberglass skin from delaminating at the bottom rail. Once delamination starts, refinishing won’t stop it. We flag finish condition on every service call and tell you when a re-coat is due before the damage becomes structural.
We’re an independent general contractor. Stonehall Construction is not authorized by or affiliated with Therma-Tru. What that means for you: our recommendations follow the condition of your door and frame, not a manufacturer’s service script. If a repair is the right call, we say so. If replacement is the honest answer, we say that too.
Therma-Tru service pricing depends on what we find. A sill replacement with OEM parts typically runs in the $200 – $500 range depending on the sill width and frame condition. Weatherstripping and corner seal replacement is usually $150 – $350. A full door replacement, including the slab, frame, sill, and hardware, lands between $1,800 and $4,500 depending on the Therma-Tru model line, size, and whether multi-point hardware is included. These are Las Vegas Therma-Tru service market ranges, not quotes. Call (833) 772-4634 and we’ll give you an exact number after looking at the door.
Book Your Therma-Tru Service in North Las Vegas, NV
If your Therma-Tru door is sticking, leaking dust, or fighting the lock, we’ll diagnose it straight. Call Nolan Briggs and the Stonehall Construction team at (833) 772-4634 to schedule your free estimate. From the curb to the kitchen, one contractor handles it all.
Written by Nolan Briggs, Owner at Stonehall Construction, serving North Las Vegas and the surrounding valley.